MALMET HOSPITAL EQUIPMENT
Hospital Equipment
Sales to Southern NSW & Northern Victoria only
Malmet equipment is manufactured in Australia under strict Quality Control procedures being ISO 9002 certified. Products are backed by a one-year warranty.
Malmet has been manufacturing specialised hospital equipment since 1969 and is a major supplier to hospitals and nursing homes throughout Australia and overseas.
Bed Panflusher Sanitisers
FS Series Automatic Bedpan Flusher/Sanitizer
- An infrared sensor beam opens and closes the chamber door. The operator's hands are both free to hold the soiled bedpan and reduce the risk of an unpleasant accident.
- Perfect loading height allows easy placement in the bedpan cradle. Closing the door automatically empties the contents, eliminating unnecessary handling. (Safety note: the door will not close if it is obstructed by the operator's hands etc)
- One touch of the Start button and the entire microprocessor-controlled sequence of cleaning and sanitization runs fully automatically. Complete cleaning of receptacles and the wash chamber itself is guaranteed.
- To prevent cross-infection risk, the full sanitizing cycle will be completed before the door can be reopened.
- The bedpan will be available for re-use within 2 minutes. The unit accommodates 1 standard bedpan (alternatively a commode bowl or slipper pan) or 2 urine bottles.
- Whisper quiet for the working environment with simplicity of operation and Malmet's legendary reliability.
|


|
| Placement |
Access Required |
Dimensions (mm) |
Height |
Width |
Depth |
Free-standing |
Both sides |
1306 |
590 |
533 |
Wall recessed |
Rear access |
1216 |
620 |
600 |
Wall recessed |
Front access |
1600 |
620 |
600 |
Add 100mm for height with legs or plinth |
IMPORTANT: For free standing models, please allow sufficient room for servicing purposes. Recommended space requirement 400mm on either side and 150mm at the rear of the unit.
Malmet also manufacture a NON VENTED unit - dimaneions remain the same. These units incorporate a condenser to remove steam and fumes when external venting is not feasible.
We have available 4 & 6 & 8 way Bottle Holders & Pan Racks wall mounted.
Water Heating |
Electric |
Steam |
Cold Water |
1/2" BPS |
1/2" BPS |
Hot Water |
1/2" BPS 45°C min |
1/2" BPS 45°C min |
Soil line |
100mm "S" or "P" trap |
100mm "S" or "P" trap |
Vent if needed |
50mm OD to atmosphere |
50mm OD to atmosphere |
Steam |
Not required |
1/2" BPS 137-345kPa (20-50 Psi) depending on temp of hot water supply |
Condensation |
Not required |
1/2" BSP |
Electrical
(Aust. only) |
3 phase with nuetral, 20A per phase, 25A circuit breaker |
240V single phase 4 amps |
|
PLEASE NOTE: It is highly recommended that the larger hot water element (16.6kW) is ordered if the hot water supply is less than 45°C. |

Top Loading Model (referred to in text)
|
Utensil Washer Disinfectors
- The Malmet Washer Disinfector is the result of years of intensive research and development, which has combined the old-fashioned Malmet philosophy of engineering with modern state-of-the-art heavy duty industrial electronics.
- The design criteria for the Malmet Washer Disinfector is to provide a commercial unit with larger capacity to hold six large bowls, tooth mugs and/or kidney dishes.
- These units can also be used in wards and CSSD for instrument washing and introduction of purpose made baskets.
- User and patient safety was of paramount importance in the Malmet Washer Disinfector conception which features top loading design and computer monitored door lock mechanism coupled to a red flashing fault light which prevents access if a properly executed cycle has not completed.
|
Warming Cabinets for Blankets, Fluid and Anaesthetic Apparatus |
Fluid Warming Cabinet
The only safe and accurate method of determining and maintaining Saline, irrigation, Glycene, Parenteral and IPD fluid temperature to the manufacturers recommendations. Fluid warming cabinets are essential in Maternity, Recovery, Theatre, Specialist and Intensive Care Units.
Malmet Fluid Warming Cabinets are the only cabinets that have a fluid temperature sensor plate enabling actual fluid temperature to be read via the main display board. Why take the risk? |
 |
Blanket Warming Cabinet
Reduce the risk of hypothermic reaction and post-operative discomfit and stress in Patients. Blankets are gently heated to restore body temperature post surgery and assist thermo-regulation. Malmet Blanket Warming Cabinets are recommended for Recovery, Maternity, General Ward, Specialist and Intensive Care Units. |
 |
Storage Cabinet
Fluid and Blanket Warming Cabinets can be combined with this lockable storage cabinet to provide convenient storage with no additional floor space requirement Use separately and this lockable cabinet has many applications throughout the health care industry. |
 |
Cabinet Stand
Convert bench or wall mounted cabinets into a convenient working height free-standing unit. The cabinet stand comes complete with adjustable feet and a removable front panel for ease of cleaning |
 |